Add Transmission Fluid to a Car

How To Add Transmission Fluid to a Car?

This post may contain affiliate links. That means if you click and buy, we may receive a small commission (at zero cost to you). Please see our full disclosure policy for details.

Transmission fluids carry out some important functions in vehicles, without which the vehicle will not be efficient. Depending on the type of transmittance within your vehicle, you could use different auto transmission fluid types. There are standard, manual, and automatic types of transmission in vehicles, and all these use their corresponding fluids. 

Motor oil, type F, HFM Fluids, and Hyoid oil are examples of transmission fluids. These conveyance fluids function as engine coolants, rotational velocity increases, lubricants, and gasket conditioners.

What Is a Transmission Fluid?

This isn’t entirely as complicated as you may think; in simple terminology, transmission fluid is an oily liquid that guarantees the continuous lubrication of your vehicle’s conductance. This particular lubricant function is crucial to the optimization of transmittance for movement.

Therefore, it would put you at a great disadvantage if you are ignorant of your responsibilities in guaranteeing a successful transmission process. Firstly, you ought to know what type of transmission fluid your automobile requires. For this information, look up your car’s manufacturer’s manual. 

Secondly, you should check and add more conveyance or transmission fluid when the volume has decreased, and we shall go on to tell you more about this now. Don’t worry; it’s not difficult at all. Adding transmission fluid to a car is as easy as eating a piece of cake.

Steps to Adding Transmission Fluid

Before you start to add your transmission fluid, you need to prepare the following materials; you will need them 

Steps Required to Quantify The Fluid Left in the Car

You will need to take the initial steps to verify the quantity of transmission fluid present in the vehicle. To do this and achieve an accurate result, take the following steps:

  1. Firstly, you have to check the quantity of transmittal fluid within the vehicle. This should enable you to identify how much conveyance fluid you should add for better lubrication. 
  2. To determine the volume of transmission fluid, heat the car’s engine for a while, and allow the automobile power plant to cool for a bit. This is done to raise the temperature of the conductance fluid to enhance the accuracy of results.
  3. Ensure your vehicle is on a level plane, so your result will be correct.
  4. Insert your dipstick within the conveyance fluid to see the quantity of transmission fluid left on the vehicles. This will give you an idea of how much transmission fluid is left in the car. From there, you will know the amount of fluid you will add.

Now that you have gauged the level of the transmission left in the car, take the reading and use it to measure how much fluid the car will need. 

Steps Required Add the Transmission Fluid

  1. Check out your vehicle producer’s handbook to confirm what particular brand of transmission fluid should be added to your vehicle. The reason for this is because repeated use of inappropriate or substandard transmittal fluids could decrease your vehicle’s engine life.
  2. Although it’s best to put the vehicle’s power plant on while you’re adding the transmission fluid, you must also endeavor to turn on the handbrake to ensure the vehicle doesn’t move away unexpectedly.
  3. Place a funnel into the vent leading to the compartment containing the transmittal fluid.
  4. If you wish to restore all the conveyance fluid present in the vehicle, you must add a lot of fluid. You may be adding anything between 9.5 liters and 13.7 liters.
  5. If you are only topping the transmission fluid in your vehicle, you wouldn’t need more than between 0.5 liters and 1.1 liters to raise your vehicle’s transmission fluid volume.
  6. If what your vehicle requires is servicing; you would need the most quantity of transmittal fluid because servicing a vehicle means the pan which holds the conductance fluid had to be emptied and refilled again. 
  7. After adding the required amount of transmission fluid, you need to depress the brakes to get the fluid properly circulated within the fluid pan. 
  8. After that, you can check if the fluid pan is filled with the dipstick’s aid, and depending on what you obtain, you could add about 0.5 liters more to the transmittal fluid pan.
  9. After you have confirmed that fluid levels are fine, you can replace the dipstick in the transmission dipstick sleeve, press it down, and lock the conveyance fluid vent.

Things to Keep in Mind

There are signs you should watch for to predict accurately that your car is running out of transmission fluid. Below are a few of the symptoms of low car transmission fluid:

  • Transmission System Overheat

The transmission fluid is put in your car to keep the transmission system at a very low temperature and cool. However, once it is getting low, it creates room for friction which results in excessive heat to be generated, thereby reducing the performance of the engine and, by extension, the car.

  • Gear Slips

Once you notice that upon engagement your car gear slips, you should check the transmission. There is a high chance that it is getting low and not enough to keep the gear pedal in your preferred position.

  • Irregular Gear Shift

Another symptom of low transmission fluid is the erratic gear shift. The shift will either happen too late or too early. Typically, the hydraulic pressure should be smooth and constant, but a low transmission fluid level causes it to be imprecise. To ensure that everything is working correctly, make sure you add transmission fluid so you don’t run into any issues such as bad transmission mounts.

Other things to keep in mind include difficulty in changing gear and delay in gear engagement.

Final Thoughts

Adding transmission fluid to a car requires carefulness, the ability to observe, and the availability of some good quantity of transmission fluid. If your vehicle doesn’t give a dipstick, it would also be a great idea to purchase one to obtain your conductance fluid volume readings accurately.

Many car owners and drivers prefer to go for a professional mechanic to help them change the transmission fluid. But the cost implication is huge, they will want to opt for the DIY method. However, changing or adding transmission fluid to your car does not require any serious professional touch. A properly done Do-It-Yourself method will add the transmission fluid with little or no hassle.

Similar Posts