Simply purchasing one of the best motorcycles isn’t where owning a motorcycle stops; even Harley Davidson motorcycles need detailing after some time. It is up to the motorcyclist or bike owner to decide how to go about the detailing of the motorcycle.
We all love our motorcycles; what’s not to love? More importantly, we want it to always be in the best condition all the time. This is important even if you intend to sell the motorcycle after a while; a well-detailed motorcycle will fetch you a really high price in the market.
Below is a detailed step-by-step process of how to detail a motorcycle:
1. Hose it Down Before Washing
Before washing, spray your motorcycle down with a garden hose; this helps to remove the strong and stubborn dirt hanging on to the lower section of your bike and can help you avoid scratching on your bike. After this, you can use a soft washing mitt, and a motorcycle cleaner to scrub your motorcycle’s firm surfaces. Once this is done, rinse your motorcycle off with a hose. Always go for soft detergents except if your motorcycle is extremely dirty, then you can use harsher soaps.
Another method of washing your bike if it isn’t that dirty is by simply getting a towel, wetting it, and wiping the surface of your bike to make it clean. Intermittently switch the sides of the towel, and when it is dirty, swap for a clean, new one.
2. Cleaning Your Wheels
There are different cleaners for wheels; they are crucial; after all, your wheels need to be washed separately from the hard surface of your motorcycle because the materials differ. Wash the wheels with a tire cleaner and a soft washing soap to wipe away oils and dirt from the tires. When they are wiped clean, you can choose to polish and hold them in the shine.
3. Cleaning the Controls
It is not recommended that you get the controls of your motorcycle wet; this is because of the electronic parts of the dash. To wipe it clean, use a cleaner that comes with UV protection for colored plastics as well as the clear ones. You can find different cleaners on Amazon that provide a quality coating that shields your plastics from UV.
4. Cleaning Your Engines
Even if you have the best engines or exhaust pipe, it is still important to always maintain it. Don’t forget the engine of your vehicle is the powerhouse. If the engine breathes well, your bike receives life. If the engine doesn’t, the bike also gets sick.
The cleaning process depends on the level of your engine’s dirtiness. If it isn’t so dirty just brush it over with a soft brush and a washing soap while you’re carrying out the first washing.
If it is extremely dirty, you will be requiring a strong degreaser to do the job. Before cleaning, make sure your engine isn’t hot and is also under a shade as it is being cleaned. Avoid highly corrosive agents and stick to the engine-cleaning instructions in the service manual.
5. Treat Your Leather
The leather of your motorcycle seat differs, and if you have one of the best seat pads for motorcycles, then you would understand the need for maintenance. The leather type depends on the type of cleaning it requires. However, a soft towel and a gentle washing soap should do the trick and keep your motorcycle looking great at all times.
6. Always Rinse Well
After washing, make use of soft water to properly rinse off your bike. Ensure you absorb excess water off your bike to ensure that there are no residues left behind on the bike or any kind of spot. There are different suitable processes for absorbing water that you can read up on; some of them are complex but worth learning for your bike’s safety.
7. Dry it Off Properly
We all know that bikes have different nooks and crannies that could make drying it off a complex job. Make sure to look in every corner of your bike to ensure it is dry. Make sure the bike is dry using a suitable air dryer, and whatever the air dryer misses can be wiped dry with a soft dry towel.
8. Seal in the Paint
Motorcycle paint differs from car paint in many ways; the paint condition determines if you will need to polish it and use a sealant on it. The sad reality is that some riders and bike owners don’t take anti-corrosion paint seriously. A quality paint will prevent your bike from corroding or rusting when it comes in contact with the elements. If you’ve been neglecting the paint of your bike, now is the right time to take care of it and then wax it afterward.
Frequently Asked Questions
Q: Can you choose to pressure-wash a motorcycle?
Yes, but only if your motorcycle is very dirty. A pressure washer will help you get tough dirt off it; be careful around the engines when using a pressure washer.
Q: How often should I wash my bike?
It is recommended that you wash your bike every two weeks. Some people who like to see their bikes clean at all times might choose to wash it every week, but the maximum limit is two weeks.
Q: Can you choose to pressure wash a Harley Davidson motorcycle?
Not at all! Apart from the fact that Harley Davidson motorcycles are in a world of their own, you should not try to pressure wash. This should be wholly avoided, except if you want to replace the wheel bearing of your bike.
Detailing your motorcycle can be a hard task to carry out or a high feat that appears difficult to achieve, but at the end of it all, you will be rewarded with a new-looking bike. Who doesn’t want a bike that turns heads around? Or who is against a motorcycle that will fetch them amazing prices if they ever choose to sell it off?